Nissan Altima 2007-2012 Service Manual: Passenger side door mirror defogger

Nissan Altima 2007-2012 Service Manual / Defogger / Component diagnosis / Passenger side door mirror defogger

Description

Heats the heating wire with the power supply from the rear window defogger relay to prevent the door mirror from fogging up.

Component Function Check

1.CHECK DOOR MIRROR DEFOGGER RH

Check that the heating wire of door mirror defogger RH is heated when turning the rear window defogger switch ON.

Is the inspection result normal? YES >> Door mirror defogger RH is OK.

NO >> Refer to DEF-17, "Diagnosis Procedure".

Diagnosis Procedure

1. CHECK POWER SUPPLY CIRCUIT

1. Turn ignition switch OFF.

2. Disconnect door mirror RH.

3. Turn ignition switch ON.

4. Check voltage between door mirror RH connector and ground.

Is the inspection result normal? YES >> GO TO 2

NO >> Repair or replace harness.

2. CHECK GROUND CIRCUIT

1. Turn ignition switch OFF.

2. Check continuity between door mirror RH connector and ground.

Is the inspection result normal? YES >> GO TO 3

NO >> Repair or replace harness.

3. CHECK PASSENGER SIDE DOOR MIRROR DEFOGGER

Check door mirror defogger RH.

Refer to DEF-18, "Component Inspection".

Is the inspection result normal? YES >> GO TO 4

NO >> Replace door mirror RH. Refer to MIR-19, "Removal and Installation".

4. CHECK INTERMITTENT INCIDENT

Check intermittent incident.

Refer to GI-42, "Intermittent Incident".

Is the inspection result normal? YES >> Check the following.

• Battery power supply circuit.

• Fuse block (J/B).

NO >> Repair or replace the malfunctioning parts.

Component Inspection

1. CHECK DOOR MIRROR DEFOGGER RH

1. Turn ignition switch OFF.

2. Disconnect door mirror RH.

3. Check continuity between door mirror terminals.

Is the inspection result normal? YES >> Inspection End.

NO >> Replace door mirror RH. Refer to MIR-19, "Removal and Installation".

    Driver side door mirror defogger
    Description Heats the heating wire with the power supply from the rear window defogger relay to prevent the door mirror from fogging up. Component Function Check 1. CHECK DOOR MIRROR DEFOGGER ...

    ECU diagnosis
    BCM (BODY CONTROL MODULE) Reference Value VALUES ON THE DIAGNOSIS TOOL Terminal Layout Physical Values 1: Sedan only 2: With LH front window ant ...

    Other materials:

    P2100, P2103 throttle control motor relay
    Description Power supply for the throttle control motor is provided to the ECM via throttle control motor relay. The throttle control motor relay is ON/OFF controlled by the ECM. When the ignition switch is turned ON, the ECM sends an ON signal to throttle control motor relay and battery vol ...

    Bluetooth® settings
    To access and adjust the settings for the Bluetooth® Hands-Free Phone System: 1. Press the SETTING button. 2. Use the TUNE/SCROLL knob to select “Bluetooth” and then press the ENTER button: ● Bluetooth Select “On” or “Off” to turn the vehicle’s Bluetooth® system on or ...

    Noise
    Component Function Check SYMPTOM: Noise INSPECTION FLOW *1 HAC-102, "Operational Check" *2 EM-16, "Checking Drive Belts" (QR25DE) or EM-121, "Checking Drive Belts" (VQ35DE) *3 HAC-159, "Performance Chart" *4 HA-45, "Removal and Installation for ...