Nissan Altima 2007-2012 Service Manual: Power steering solenoid valve

Description

• Power steering solenoid valve controls the power steering oil pressure in the gear housing assembly.

Diagnosis Procedure

1.CHECK POWER STEERING SOLENOID VALVE SIGNAL

1. Start engine.

2. Check voltage between power steering control unit harness connector M59 terminal 1 and ground.

Is the inspection result normal? YES >> GO TO 2.

NO >> GO TO 4.

2.CHECK HARNESS BETWEEN POWER STEERING SOLENOID VALVE AND POWER STEERING CONTROL UNIT

1. Turn the ignition switch OFF.

2. Disconnect power steering solenoid valve harness connector.

3. Disconnect power steering control unit harness connector.

4. Check the continuity between power steering solenoid valve harness connector E14 (A) terminal 1 and 2 and the power steering control unit harness connector M59 (B) terminal 1 and 5.

Also check harness for short to ground and short to power.

Is the inspection result normal? YES >> GO TO 3.

NO >> Repair or replace damaged parts.

3.CHECK POWER STEERING SOLENOID VALVE

1. Check resistance between power steering solenoid valve terminals.

2. Check power steering solenoid valve by listening for its operation sound while applying battery voltage to power steering solenoid valve terminal 1 (positive) and battery ground to terminal 2 (negative).

Is the inspection result normal? YES >> GO TO 4.

NO >> Replace power steering solenoid valve. Refer to ST-28, "Exploded View".

4.CHECK TERMINALS AND HARNESS CONNECTORS

• Check power steering control unit pin terminals for damage or loose connection with harness connector.

• Check power steering solenoid valve pin terminals for damage or loose connection with harness connector.

Is the inspection result normal? YES >> Inspection End

NO >> Repair or replace damaged parts.

    Power supply and ground circuit
    Description • EPS system functions by ignition power supply. Diagnosis Procedure 1.CHECK POWER SUPPLY 1. Turn the ignition switch OFF. 2. Disconnect power steering control unit harness conn ...

    Engine speed signal circuit
    Description • ECM sends engine speed signal to power steering control unit. Diagnosis Procedure 1.PERFORM ECM SELF-DIAGNOSIS Perform ECM self-diagnosis. Is any error system detected? YES ...

    Other materials:

    Making a call
    To make a call, follow the procedure below: 1. Press the   button on the control panel. The “Phone” screen will appear on the display. 2. Select one of the following options to make a call: ● “Phonebook”: Select the name from an entry stored in the vehicle phonebook. &# ...

    Microphone
    Diagnosis Procedure 1.CHECK POWER SUPPLY CIRCUIT (MICROPHONE SIDE) Check voltage between microphone harness connector and ground. Is proper voltage present? YES >> GO TO 4 NO >> GO TO 2 2.CHECK POWER SUPPLY CIRCUIT (CONTINUITY) 1. Turn ignition switch OFF. 2. Disconnect mic ...

    Anti-pinch system does not operate normally (passenger side)
    Diagnosis Procedure 1. PERFORM INITIALIZATION PROCEDURE Perform initialization procedure. Refer to PWC-190, "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Special Repair Requirement". Is the inspection result normal? YES >> GO TO 2 NO >> Repair or replace the ma ...