Nissan Altima 2007-2012 Service Manual: Power supply and ground circuit
BCM (Body control module)
Diagnosis Procedure
1. CHECK FUSE AND FUSIBLE LINK
Check if the following BCM fuse or fusible link are blown.
Is the fuse or fusible link blown?
YES >> Replace the blown fuse or fusible li ...
Other materials:
CD changer
Diagnosis Procedure
1.CHECK FUSE
Check that the following fuses of the CD changer are not blown.
Are the fuses OK?
YES >> GO TO 2
NO >> Be sure to eliminate cause of malfunction before installing new fuse.
2.CHECK POWER SUPPLY CIRCUIT
Check voltage between CD changer harness con ...
Power window main switch
Reference Value
TERMINAL LAYOUT
PHYSICAL VALUES
MAIN POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH
Wiring Diagram
Fail Safe
FAIL-SAFE CONTROL
Switches to fail-safe control when malfunction is detected in encoder signal
that detects up/down speed and
direction of door glass. ...
Lan system circuit
Description
SYMPTOM: Mode door motor, intake door motor and/or air mix door motor does
not operate normally.
Diagnosis Procedure
DIAGNOSIS PROCEDURE FOR LAN CIRCUIT
1.CHECK POWER SUPPLY FOR DOOR MOTORS
1. Press ignition switch ON.
2. Check voltage between front air control connector M37 ...