Nissan Altima 2007-2012 Service Manual: Power supply and ground circuit

B261A push-button ignition switch
Description BCM transmits the change in the power supply position with the push-button ignition switch to IPDM E/R via the CAN communication line. IPDM E/R transmits the power supply position sta ...

BCM
Diagnosis Procedure 1. CHECK FUSE AND FUSIBLE LINK Check if the following BCM fuse or fusible link are blown. Is the fuse or fusible link blown? YES >> Replace the blown fuse or fusible li ...

Other materials:

Passenger seat belt warning system
System Diagram System Description The seat belt warning lamp (1) will remind the driver if the driver or front passenger seat belt should be buckled. The system works in conjunction with the occupant classification system. Refer to SRC- 10, "Occupant Classification System (OCS)". ...

CSC (Concentric slave cylinder)
Exploded View 1. Transaxle assembly 2. CSC (Concentric Slave Cylinder) Removal and Installation CAUTION: • If transaxle assembly is removed from the vehicle, always replace CSC. Return CSC insert to original position to remove transaxle assembly. Dust on clutch disc sliding parts may ...

Camera on signal circuit (coupe)
Description When the selector lever is placed in the R position, the rear view camera control unit sends a camera ON signal to the rear view camera. Diagnosis Procedure 1.CHECK CAMERA ON SIGNAL CIRCUIT CONTINUITY 1. Turn ignition switch OFF. 2. Disconnect rear view camera control unit con ...