Nissan Altima 2007-2012 Service Manual: Power window control system LH only anti-pinch-sedan
- Basic inspection
- Function diagnosis
- Component diagnosis
- ECU diagnosis
- Precaution
- Symptom diagnosis
- None of the power windows can be operated using any switch
- Driver side power window alone does not operate
- Front passenger side power window alone does not operate
- Rear lh side power window alone does not operate
- Rear rh side power window alone does not operate
- Anti-pinch system does not operate normally (driver side)
- Auto operation does not operate but manual operates normally (driver side)
- Power window retained power operation does not operate properly
- Power window lock switch does not function
- On-vehicle maintenance
- On-vehicle repair
On-vehicle repair
POWER WINDOW MAIN SWITCH
Removal and Installation
REMOVAL
1. Remove the power window main switch finisher (2). Refer to
INT-12, "Removal and Installation".
2. Power window main swit ...
Basic inspection
...
Other materials:
License plate lamp
Bulb Replacement
REMOVAL
1. Position trunk lid finisher aside.
2. Turn license plate lamp bulb socket counterclockwise to unlock
and remove.
3. Pull license plate lamp bulb to remove from socket.
INSTALLATION
Installation is in the reverse order of removal.
Removal and Installation
...
P0128 Thermostat function
DTC Logic
DTC DETECTION LOGIC
NOTE:
If DTC P0128 is displayed with DTC P0300, P0301, P0302, P0303, P0304, P0305 or
P0306, first perform
the trouble diagnosis for DTC P0300, P0301, P0302, P0303, P0304, P0305, P0306.
Refer to EC-1283,
"DTC Logic".
Engine coolant temperature has n ...
B26E1 No reception of engine status
signal
Description
BCM receives the engine status signal from ECM via CAN communication.
DTC Logic
DTC DETECTION LOGIC
NOTE:
• If DTC B26E1 is displayed with DTC U1000, first perform the trouble diagnosis
for DTC U1000. Refer to
SEC-235, "DTC Logic".
• If DTC B26E1 is displayed wi ...