Nissan Altima 2007-2012 Service Manual: Power window main switch

Reference Value

TERMINAL LAYOUT

PHYSICAL VALUES

MAIN POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH

Wiring Diagram

Fail Safe

FAIL-SAFE CONTROL

Switches to fail-safe control when malfunction is detected in encoder signal that detects up/down speed and direction of door glass. Switches to fail-safe control when error beyond regulation value is detected between the fully closed position and the actual position of the glass.

It changes to condition before initialization and the following functions do not operate when switched to failsafe control.

• Auto-up operation

• Anti-pinch function

• Retained power function

Perform initial operation to recover when switched to fail-safe mode. However, it switches back to fail-safe control when malfunction is found in power window switch or in motor.

ECU diagnosis

...

Front power window switch

Reference Value TERMINAL LAYOUT PHYSICAL VALUES POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH RH Wiring Diagram Fail Safe FAIL-SAFE CONTROL Switches to fail-safe control when malf ...

Other materials:

Diagnosis system (meter)
Diagnosis Description SELF-DIAGNOSIS MODE • Odo/trip meter and information display segment operation can be checked in self-diagnosis mode. • Meters/gauges can be checked in self-diagnosis mode. OPERATION PROCEDURE 1. Turn the ignition switch OFF. 2. While pushing the odo/trip meter ...

Rear speaker
Removal and Installation - Coupe REMOVAL 1. Remove the trunk front finisher. Refer to INT-23, "Removal and Installation". 2. Remove the rear speaker screws (A), then disconnect the rear speaker connector (B) and remove the rear speaker (1). INSTALLATION Installation is in the ...

Rear bumper
Removal and Installation 1. Rear bumper supports 2. Rear bumper reinforcement 3. Energy absorbing foam 4. Splash shield LH 5. Rear bumper fascia 6. Splash shield RH REMOVAL 1. Remove the LH and RH rear combination lamps. Refer to EXL-260, "Removal and Installation". 2. Rem ...