Nissan Altima 2007-2012 Service Manual: Power window serial link
Door key cylinder switch
Description
Main power window and door lock/unlock switch detects condition of the door
key cylinder and transmits to
BCM as the LOCK or UNLOCK signals.
Component Function Check
1. CHECK DOOR K ...
Power window main switch
Description
Main power window and door lock/unlock switch, power window and door
lock/unlock switch RH and BCM
transmit and receive the signal by power window serial link.
The signal mentioned ...
Other materials:
DLC branch line circuit
Diagnosis Procedure
INSPECTION PROCEDURE
1.CHECK CONNECTOR
1. Turn the ignition switch OFF.
2. Disconnect the battery cable from the negative terminal.
3. Check the terminals and connectors of the data link connector for damage,
bend and loose connection
(connector side and harness side) ...
Intake manifold
Removal and Installation
1. Intake manifold
2. Gasket
A. Follow installation procedure
REMOVAL
WARNING:
To avoid the danger of being scalded, never drain the coolant when the engine is
hot.
1. Remove the engine cover with power tool.
2. Release the fuel pressure. Refer to EC-1579, &quo ...
P0720 vehicle speed sensor cvt (secondary
speed sensor)
Description
The vehicle speed sensor CVT [output speed sensor (secondary speed sensor)]
detects the revolution of the
CVT output shaft and emits a pulse signal. The pulse signal is sent to the TCM,
which converts it into vehicle
speed.
DTC Logic
DTC DETECTION LOGIC
DTC CONFIRMATION PROCE ...