Nissan Altima 2007-2012 Service Manual: Push button ignition switch

Removal and Installation

REMOVAL

1. Remove the cluster lid A assembly. Refer to IP-12, "Removal and Installation".

2. Release the pawls (A) and remove the push-button ignition switch (1) from cluster lid A.

INSTALLATION

Installation is in the reverse order of removal.

    BCM (Body control module)
    Removal and Installation For removal and installation of the BCM refer to BCS-96, "Removal and Installation". ...

    Other materials:

    B210c starter control relay
    Description Starter control relay, integrated in IPDM E/R, permits the starter relay operation when in N or P position and the steering is locked or unlocked. It is installed in parallel with the starter relay. DTC Logic DTC DETECTION LOGIC NOTE: • If DTC B210C is displayed with DTC U100 ...

    P1564 ASCD Steering switch
    Description ASCD steering switch has variant values of electrical resistance for each button. ECM reads voltage variation of switch, and determines which button is operated. Refer to EC-603, "System Description" for the ASCD function. DTC Logic DTC DETECTION LOGIC NOTE: If DTC ...

    Battery replacement
    CAUTION Be careful not to allow children to swallow the battery or removed parts. NISSAN INTELLIGENT KEY® Replace the battery in the Intelligent Key as follows: 1. Remove the mechanical key from the Intelligent Key. 2. Insert a small screwdriver A into the slit B of the corner and twist it ...