Nissan Altima Owners Manual: Push starting
CAUTION
● Do not push start this vehicle. The three-way catalyst may be damaged.
● Continuously Variable Transmission (CVT) models cannot be push-started or tow-started. Attempting to do so may cause transmission damage.
Jump starting
To start your engine with a booster battery, the instructions and precautions below must be followed. WARNING ● If done incorrectly, jump starting can lead to a battery explosion, resulting ...If your vehicle overheats
If your vehicle is overheating (indicated by an extremely high temperature gauge reading), or if you feel a lack of engine power, detect abnormal noise, etc. take the following steps. WARNING ...Other materials:
Fuel recommendation
Use unleaded regular gasoline with an octane
rating of at least 87 AKI (Anti-Knock Index) number
(Research octane number 91).
CAUTION
● Using a fuel other than that specified
could adversely affect the emission
control system, and may also affect the
warranty coverage.
● Under no ...
TCM branch line circuit
Diagnosis Procedure
INSPECTION PROCEDURE
1.CHECK CONNECTOR
1. Turn the ignition switch OFF.
2. Disconnect the battery cable from the negative terminal.
3. Check the following terminals and connectors for damage, bend and loose
connection (unit side and connector
side).
- TCM
- Harnes ...
B261A push-button ignition switch
Description
BCM transmits the change in the power supply position with the push-button
ignition switch to IPDM E/R via
the CAN communication line. IPDM E/R transmits the power supply position status
via CAN communication
line to BCM.
DTC Logic
DTC DETECTION LOGIC
DTC CONFIRMATION PROCED ...