Nissan Altima 2007-2012 Service Manual: Rear regulator

Exploded View

1. Rear door

2. Door glass run

3. Door glass

4. Inside seal

5. Partition sash

6. Door rear glass seal

7. Door rear glass

8. Regulator assembly

9. Window motor

10. Water shield

Disassembly

1. Remove the power window motor screws (A).

2. Remove power window motor from regulator assembly.

Assembly

Assembly is in the reverse order of disassembly.

    Front regulator
    Exploded View 1. Door 2. Inside seal 3. Door glass 4. Regulator assembly 5. Door module assembly 6. Window motor Disassembly Remove the window motor nuts (A) the four window regulator bolts ...

    Other materials:

    Blower unit
    Removal and Installation COMPONENTS 1. Heater and cooling unit 2. Blower unit Front REMOVAL 1. Remove the heater and cooling unit assembly. Refer to VTL-12, "Removal and Installation". 2. Disconnect the blower motor connector. 3. Remove the screws from the blower unit, the ...

    Cooling fan
    Removal and Installation 1. Fan blade 2. Fan shroud and motor assembly REMOVAL 1. Drain engine coolant from the radiator. Refer to CO-12, "Changing Engine Coolant". CAUTION: Perform when engine is cold. 2. Remove air cleaner duct assembly. Refer to EM-25, "Removal and In ...

    U1001 can comm circuit
    Description CAN (Controller Area Network) is a serial communication line for real time application. It is an on-vehicle multiplex communication line with high data communication speed and excellent error detection ability. Many electronic control units are equipped onto a vehicle, and each c ...