Nissan Altima manuals

Nissan Altima (L32) 2007-2012 Service Manual: Satellite radio tuner

 Diagnosis Procedure

1.CHECK FUSES

Check that the following fuses are not blown.

Are the fuses OK? YES >> GO TO 2

NO >> If fuse is blown, be sure to eliminate cause of malfunction before installing new fuse.

2.POWER SUPPLY CIRCUIT CHECK

1. Turn ignition switch OFF.

2. Disconnect satellite radio tuner (factory installed) connector B57.

3. Check voltage between the satellite radio tuner (factory installed) and ground.

Are the voltage results as specified? YES >> GO TO 3

NO >> • Check connector housings for disconnected or loose terminals.

• Repair harness or connector.

3.GROUND CIRCUIT CHECK

Inspect satellite radio tuner (factory installed) case ground.

Does case ground pass inspection? YES >> Inspection End.

NO >> Repair satellite radio tuner (factory installed) case ground.

Audio unit
Diagnosis Procedure 1.CHECK FUSES Check that the following fuses are not blown. Are the fuses OK? YES >> GO TO 2 NO >> If fuse is blown, be sure to eliminate cause of malfunction be ...

Power supply and ground circuit (sedan)
AUDIO UNIT  Diagnosis Procedure 1.CHECK FUSES Check that the following fuses are not blown. Are the fuses OK? YES >> GO TO 2 NO >> If fuse is blown, be sure to eliminate cau ...

Other materials:

Door key cylinder switch
Description Power window main switch detects condition of the door key cylinder and transmits to BCM as the LOCK or UNLOCK signals. Component Function Check 1. CHECK DOOR KEY CYLINDER SWITCH INPUT SIGNAL Check (“KEY CYL LK-SW”, “KEY CYL UN-SW”) in “DATA MONITOR” mode for “POWER ...

Subwoofer (sedan)
Description The audio unit sends audio signals to the BOSE speaker amp. The BOSE speaker amp. amplifies the audio signals before sending them to the subwoofers using the audio signal circuits. Diagnosis Procedure 1.HARNESS CHECK 1. Disconnect BOSE speaker amp. connector B122 and suspect rea ...

U0101 Can comm circuit
Description CAN (Controller Area Network) is a serial communication line for real time application. It is an on-vehicle multiplex communication line with high data communication speed and excellent error detection ability. Many electronic control units are equipped onto a vehicle, and each co ...