Nissan Altima (L32) 2007-2012 Service Manual: Service data and specifications (SDS)
General Specification
CAUTION: • Use only Genuine NISSAN CVT Fluid NS-2. Do not mix with other fluid.
• Using CVT fluid other than Genuine NISSAN CVT Fluid NS-2 will deteriorate in driveability and CVT durability, and may damage the CVT, which is not covered by the warranty.
*1: Refer to MA-12, "Fluids and Lubricants".
Vehicle Speed When Shifting Gears
Numerical value data are reference values.
CAUTION: Lock-up clutch is engaged when vehicle speed is approximately 18 km/h (11 MPH) to 90 km/h (56 MPH).
Stall Speed
Line Pressure
*1: Reference values
Solenoid Valves
CVT Fluid Temperature Sensor
Primary Speed Sensor
Secondary Speed Sensor
Removal and Installation
Removal and installation
TRANSAXLE ASSEMBLY Exploded View 1. Rear gusset 2. Air breather hose 3. CVT fluid level gauge 4. CVT fluid charging pipe 5. O-ring 6. Copper washer 7. Fluid cooler tube 8. Transaxle assem ...Other materials:
P1740 lock-up select solenoid valve
Description
• Lock-up select solenoid valve controls lock-up clutch pressure or forward
clutch pressure (reverse brake
pressure).
• When controlling lock-up clutch, the valve is turned OFF. When controlling
forward clutch, it is turned ON.
DTC Logic
DTC DETECTION LOGIC
DTC CONFIRM ...
IPDM-E branch line circuit
Diagnosis Procedure
INSPECTION PROCEDURE
1.CHECK CONNECTOR
1. Turn the ignition switch OFF.
2. Disconnect the battery cable from the negative terminal.
3. Check the terminals and connectors of the IPDM E/R for damage, bend and loose
connection (unit side
and connector side).
Is the in ...
Shift lock system
Description
The selector lever cannot be shifted from “P” position to any other position
unless the ignition switch is in the
ON position and the brake pedal is depressed.
Wiring Diagram - CVT SHIFT LOCK SYSTEM -
Coupe
Wiring Diagram - CVT SHIFT LOCK SYSTEM -
Sedan
Diagno ...