Nissan Altima 2007-2012 Service Manual: Service data and specifications (SDS)
Wheel Bearing (Rear)
On-vehicle repair
WHEEL HUB
Removal and Installation
1. Knuckle
2. Baffle plate
3. Wheel hub assembly
4. Brake rotor
5. Wheel nut
6. Anchor block
7. ABS sensor
8. Parking brake cable
A. Refer to PB-6, " ...
Front suspension
...
Other materials:
Key slot
Diagnosis Procedure
1.CHECK KEY SLOT POWER SUPPLY CIRCUI
1. Turn ignition switch OFF.
2. Disconnect key slot connector.
3. Check voltage between slot connector and ground.
Is the inspection result normal?
YES >> GO TO 2
NO >> Repair or replace key slot power supply circuit ...
P0500 VSS
Description
The vehicle speed signal is sent to the combination meter from the “ABS
actuator and electric unit (control
unit)” by CAN communication line. The combination meter then sends a signal to
the ECM by CAN communication
line.
DTC Logic
DTC DETECTION LOGIC
NOTE:
• If DTC P0 ...
Can communication circuit
Diagnosis Procedure
INSPECTION PROCEDURE
1.CONNECTOR INSPECTION
1. Turn the ignition switch OFF.
2. Disconnect the battery cable from the negative terminal.
3. Disconnect all the unit connectors on CAN communication system.
4. Check terminals and connectors for damage, bend and loose con ...
