Nissan Altima 2007-2012 Service Manual: Service data and specifications (SDS)

Accelerator Control

PEDAL TRAVEL

    On-vehicle repair
    ACCELERATOR CONTROL SYSTEM Exploded View 1. Accelerator pedal and accelerator position sensor assembly. 2. Locating pins Removal and Installation REMOVAL 1. Disconnect the battery negative ...

    Other materials:

    B210A steering lock condition switch
    Description There are 2 switches in the electronic steering column lock. IPDM E/R compares those 2 switches conditions to judge the present steering status and transmit the result to BCM via CAN communication. DTC Logic DTC DETECTION LOGIC NOTE: • If DTC B210A is displayed with DTC U100 ...

    Engine oil
    Inspection OIL LEVEL NOTE: • Before starting the engine, check the oil level. If the engine is already started, stop it and allow 10 minutes before checking. • Check that the oil level is within the range as indicated on the dipstick. • If it is out of range, add oil as necessary. Re ...

    B260F engine status
    Description BCM receives the engine status signal from ECM via CAN communication. DTC Logic DTC DETECTION LOGIC NOTE: • If DTC B260F is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to SEC-433, "DTC Logic". • If DTC B260F is displayed wi ...