Nissan Altima 2007-2012 Service Manual: Shift fork and fork rod

Exploded View

Refer to TM-28, "Exploded View".

Disassembly

1. Remove return spring to striking rod assembly.

Assembly

1. Temporarily install return spring to striking rod assembly.

CAUTION: Be careful with the orientation of return spring.

2. Attach one end of the return spring to striking interlock of striking rod assembly while holding return spring.

CAUTION: • When installing, check that return spring is securely seated in the groove of striking interlock of striking rod assembly.

Inspection

STRIKING ROD ASSEMBLY AND RETURN SPRING

• Check contact surfaces and sliding area for wear, damage, bending, etc. If necessary, replace parts.

FORK ROD AND SHIFT FORK

• Check contact surfaces and sliding area for wear, damage, bending, etc. If necessary, replace parts.

SHIFT FORK

• Check if the width of shift fork hook (sliding area with coupling sleeve) is within allowable specification below.

    Final drive
    Exploded View Refer to TM-28, "Exploded View". Disassembly 1. Remove final gear mounting bolts and then separate the final gear from differential case. 2. Remove differential side ...

    Service data and specifications (SDS)
    General Specifications TRANSAXLE FINAL GEAR End Play Baulk Ring Clearance Dimension Differential Side Bearing Preload Differential Side Gear Clearance ...

    Other materials:

    DLC branch line circuit
    Diagnosis Procedure INSPECTION PROCEDURE 1.CHECK CONNECTOR 1. Turn the ignition switch OFF. 2. Disconnect the battery cable from the negative terminal. 3. Check the terminals and connectors of the data link connector for damage, bend and loose connection (connector side and harness side ...

    B260B steering lock unit
    Description The electronic steering column lock performs the check by itself according to the steering status. DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.PERFORM DTC CONFIRMATION PROCEDURE 1. Press the push-button ignition switch, when steering is locked. 2. Check “S ...

    Service data and specifications (SDS)
    General Specifications TRANSAXLE FINAL GEAR End Play Baulk Ring Clearance Dimension Differential Side Bearing Preload Differential Side Gear Clearance ...