Nissan Altima 2007-2012 Service Manual: Shift lock system

System Diagram

System Description

The selector lever cannot be shifted from “P” position to any other position unless the ignition switch is in the ON position and the brake pedal is depressed.

Component Parts Location

1. BCM (view with instrument panel removed

2. Steering column

3. Stop lamp switch

4. Shift lock release button

5. Detention switch (for manual shift)

6. Shift lock solenoid/Detent switch (key)

7. CVT device connector

Component Description

    Shift mechanism
    System Diagram NOTE: The gear ratio is set for every position separately. System Description In order to select the gear ratio which can obtain the driving force in accordance with driver's ...

    On board diagnostic (OBD) System
    Diagnosis Description DESCRIPTION The CVT system has two self-diagnostic systems. The first is the emission-related on board diagnostic system (OBD-II) performed by the TCM in combination wit ...

    Other materials:

    Hood
    1 Pull the hood lock release handle located below the driver’s side instrument panel; the hood springs up slightly. 2 Push the lever at the front of the hood to the side as illustrated with your fingertips and raise the hood. 3 Remove the support rod from the clamp. 4 Insert the support r ...

    How to use the touch screen
    CAUTION ● The glass display screen may break if it is hit with a hard or sharp object. If the glass screen breaks, do not touch it. Doing so could result in an injury. ● To clean the display, never use a rough cloth, alcohol, benzine, thinner or any kind of solvent or paper towe ...

    Main line between dlc and abs circuit
    Diagnosis Procedure INSPECTION PROCEDURE 1.CHECK CONNECTOR 1. Turn the ignition switch OFF. 2. Disconnect the battery cable from the negative terminal. 3. Check the following terminals and connectors for damage, bend and loose connection (connector side and harness side). - Harness co ...