Nissan Altima (L32) 2007-2012 Service Manual: Side ventilator grilles
Removal and Installation
REMOVAL
Release the tabs and then remove the side ventilator grilles using a suitable tool.
CAUTION: Use a suitable tool to remove the grille to avoid damage to the instrument panel.
INSTALLATION
Installation is in the reverse order of removal.
REMOVAL
1. Remove the instrument panel. Refer to IP-12, "Removal and Installation".
2. Remove the upper ventilator duct screws using power tools.
3. Remove the upper ventilator duct.
INSTALLATION
Installation is in the reverse order of removal.
Center ventilator grilles
Removal and Installation
REMOVAL
Remove the center ventilator grilles (1) from the instrument panel
using a suitable tool.
INSTALLATION
Installation is in the reverse order of removal. ...
Upper ventilator duct
Removal and Installation
REMOVAL
Remove the front defroster grille LH/RH from the instrument panel using a
suitable tool.
CAUTION:
Use a suitable tool to remove the grille to avoid damage ...
Other materials:
B261A push-button ignition switch
Description
IPDM E/R transmits the push-button ignition switch status via CAN
communication to BCM. BCM receives
push-button ignition switch status by hardwire input. BCM compares the 2 signals
for mismatch.
DTC Logic
DTC DETECTION LOGIC
NOTE:
• If DTC B261A is displayed with DTC U1000, ...
BCM branch line circuit
Diagnosis Procedure
INSPECTION PROCEDURE
1.CHECK CONNECTOR
1. Turn the ignition switch OFF.
2. Disconnect the battery cable from the negative terminal.
3. Check the terminals and connectors of the BCM for damage, bend and loose
connection (unit side and
connector side).
Is the inspect ...
Differential side oil seal
Exploded View
1. CVT assembly
2. Differential side oil seal
Removal and Installation
REMOVAL
1. Remove drive shaft assembly. Refer to FAX-11, "Removal and
Installation (Left Side)" and FAX-12, "Removal and Installation
(Right Side)".
2. Remove the differential sid ...
