Nissan Altima Owners Manual: Startup display

When the vehicle in placed in the ON or ACC position the screens that display in the vehicle information include:
● Active system status (if so equipped) ● Trip computer
● Tire pressure information (if so equipped) ● Fuel economy
● Warnings

Warnings will only display if there are any present, for more information on warnings and indicators see, “Vehicle information display warnings and indicators” in this section.

To control what items display in the vehicle information display, see “Main menu selection” in this section.

    How to use the vehicle information display
    The vehicle information display can be changed using the buttons and ENTER located on the steering wheel. 1. — navigate through the items in vehicle information ENTER — change or se ...

    Settings
    The setting mode allows you to change the information displayed in the vehicle information display: ● Driver Assistance (if so equipped) ● Main Menu Selection ● Body Color χ ...

    Other materials:

    Optical sensor
    Description The optical sensor converts the outside brightness (lux) to voltage and transmits the optical sensor signal to the BCM. Component Function Check 1.CHECK OPTICAL SENSOR SIGNAL BY CONSULT-III 1. Turn the ignition switch ON. 2. Select "OPTICAL SENSOR" of BCM (HEAD LAMP ...

    Camshaft valve clearance
    Camshaft valve clearance • Perform this inspection as follows after removal, installation, or replacement of the camshaft or any valverelated parts, or if there are any unusual engine conditions due to changes in valve clearance over time (starting, idling, and/or noise). 1. Warm up the ...

    Combination meter
    Diagnosis Procedure 1.CHECK FUSES Check for blown combination meter fuses. Is the inspection result normal? YES >> GO TO 2 NO >> If fuse is blown, be sure to eliminate cause of malfunction before installing new fuse. 2.POWER SUPPLY CIRCUIT CHECK 1. Disconnect combination meter ...