Nissan Altima 2007-2012 Service Manual: Symptom diagnosis

COMBINATION SWITCH SYSTEM SYMPTOMS

Symptom Table

1. Perform the data monitor of CONSULT-III to check for any malfunctioning item.

2. Check the malfunction combinations.

3. Identify the malfunctioning part from the agreed combination and repair or replace the part.

    ECU diagnosis
    BCM (BODY CONTROL MODULE) Reference Value VALUES ON THE DIAGNOSIS TOOL Terminal Layout Physical Values 1: Sedan only 2: With LH front window a ...

    Precaution
    Supplemental Restraint System (SRS) "AIR B AG" and "SEAT BELT PRE-TENSIONER" The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used al ...

    Other materials:

    Turn signal and hazard warning lamp system
    Wiring Diagram - Coupe Wiring Diagram - Sedan ...

    Conditions the remote start will not work
    The remote start will not operate if any of the following conditions are present: ● The ignition switch is placed in the ON position. ● The hood is not securely closed. ● The hazard warning lights are on. ● The I–Key Indicator Light remains solid in the vehicle inform ...

    Anti-pinch system does not operate normally (driver side)
    Diagnosis Procedure 1. PERFORM INITIALIZATION PROCEDURE Perform initialization procedure. Refer to PWC-190, "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Special Repair Requirement". Is the inspection result normal? YES >> GO TO 2 NO >> Repair or replace the ma ...