Nissan Altima 2007-2012 Service Manual: Theft ALM

 CONSULT-III Function (BCM - THEFT ALM)

WORK SUPPORT

DATA MONITOR

ACTIVE TEST

    Trunk
    CONSULT-III Function (BCM - TRUNK) DATA MONITOR ACTIVE TEST ...

    Retained PWR
    CONSULT-III Function (BCM - RETAINED PWR) Data monitor ...

    Other materials:

    BCM branch line circuit
    Diagnosis Procedure INSPECTION PROCEDURE 1.CHECK CONNECTOR 1. Turn the ignition switch OFF. 2. Disconnect the battery cable from the negative terminal. 3. Check the terminals and connectors of the BCM for damage, bend and loose connection (unit side and connector side). Is the inspec ...

    B2604 PNP switch
    Description BCM confirms the shift position with the following 4 signals. • CVT selector lever • P/N position switch • P position signal from IPDM E/R (CAN) • P position signal from TCM (CAN) DTC Logic DTC DETECTION LOGIC NOTE: • If DTC B2604 is displayed with DTC U1000, first ...

    Fuel pump
    Description *: ECM determines the start signal status by the signals of engine speed and battery voltage. The ECM activates the fuel pump for several seconds after the ignition switch is turned ON to improve engine start ability. If the ECM receives a engine speed signal from the camshaft ...