Nissan Altima 2007-2012 Service Manual: Throttle valve closed position learning

 Description

Throttle Valve Closed Position Learning is a function of ECM to learn the fully closed position of the throttle valve by monitoring the throttle position sensor output signal. It must be performed each time the harness connector of electric throttle control actuator or ECM is disconnected.

Special Repair Requirement

1.START

1. Check that accelerator pedal is fully released.

2. Turn ignition switch ON.

3. Turn ignition switch OFF and wait at least 10 seconds.

Check that throttle valve moves during the above 10 seconds by confirming the operating sound.

>> END

    Accelerator pedal released position learning
     Description Accelerator Pedal Released Position Learning is a function of ECM to learn the fully released position of the accelerator pedal by monitoring the accelerator pedal position sens ...

    Idle air volume learning
     Description Idle Air Volume Learning is a function of ECM to learn the idle air volume that keeps engine idle speed within the specific range. It must be performed under the following condi ...

    Other materials:

    Oil filter
    Removal and Installation REMOVAL 1. Remove the oil filter using Tool. Tool number : KV10115801 (J-38956) WARNING: • Be careful not to get burned, the engine and engine oil may be hot. CAUTION: • When removing, prepare a shop cloth to absorb any oil leakage or spillage. • Do not all ...

    ASCD Indicator
    Description The ASCD operation status is indicated by two indicators, (CRUISE and SET on the information display) on the combination meter. CRUISE indicator is displayed to indicate that ASCD system is ready for operation when MAIN switch on ASCD steering switch is turned ON. SET indica ...

    Drive belts
    Checking Drive Belts 1. Power steering pump 2. Drive belt auto-tensioner 3. Crankshaft 4. Idler pulley 5. A/C compressor pulley 6. Generator pulley 7. Idler pulley 8. Drive belt A. Indicator B. Possible use range (for new belt) C. Belt replacement WARNING: Inspect and check the drive ...