Nissan Altima 2007-2012 Service Manual: Transmission control module
Exploded View
1. TCM
2. Bracket
3. Battery
Removal and Installation
REMOVAL
1. Disconnect the battery negative terminal.
2. Remove the fresh air intake tube (upper).
3. Disconnect the TCM harness connector.
4. Remove the TCM (1) from the bracket (2).
• Battery (3)
INSTALLATION
Installation is in the reverse order of removal.
Control device
Exploded View 1. Control lever knob 2. Lock pin 3. Knob cover 4. Control device selector plate 5. Control device assembly Removal and Installation REMOVAL 1. Remove the center console assemb ...Other materials:
Ignition signal
Description
The ignition signal from the ECM is sent to and amplified by the power
transistor. The power transistor turns
ON and OFF the ignition coil primary circuit. This ON/OFF operation induces the
proper high voltage in the coil
secondary circuit.
Component Function Check
1.INSPECTION ...
Power window main switch
Description
• BCM supplies power.
• It operates each power window motor via corresponding power window switch and
makes window move up/
down when main power window and door lock/unlock switch is operated.
Component Function Check
Main Power Window And Door Lock/unlock Switch
1. CHECK ...
Air cleaner filter
Removal and Installation
1. Air duct hose
2. Air cleaner filter
3. Air cleaner case (front)
4. Front air duct
5. Air cleaner mounting bracket
6. Air cleaner case (rear)
7. Mass air flow sensor
A. To electric throttle control actuator
B. Air cleaner case side clips
CHANGING THE AIR CLEANE ...