Nissan Altima 2007-2012 Service Manual: Trunk

CONSULT-III Function (BCM - TRUNK)

DATA MONITOR

ACTIVE TEST

    Battery saver
    CONSULT-III Function WORK SUPPORT * : Initial setting DATA MONITOR ACTIVE TEST * : Each lamp switch is in ON position. ...

    Theft ALM
     CONSULT-III Function (BCM - THEFT ALM) WORK SUPPORT DATA MONITOR ACTIVE TEST ...

    Other materials:

    B1209 – b1210 collision detection
    Description DTC B1209 - B1210 COLLISION DETECTION The air bag diagnosis sensor unit will set this DTC if it has detected a collision which has resulted in a frontal or side deployment of one or more air bags or pre-tensioners. If this DTC is detected after a SRS repair, the air bag diagnosis ...

    Normal operating condition
    Description AUDIO SYSTEM The majority of the audio troubles are the result of outside causes (bad CD, electromagnetic interference, etc.). Noise The following noise results from variations in field strength, such as fading noise and multi-path noise, or external noise from trains and oth ...

    P0730 belt damage
    Description TCM selects the gear ratio using the engine load (throttle position), the primary pulley revolution speed, and the secondary pulley revolution speed as input signal. Then it changes the operating pressure of the primary pulley and the secondary pulley and changes the groove width ...