Nissan Altima (L32) 2007-2012 Service Manual ≻ Security control system coupe ≻ Component diagnosis ≻ U1010 control unit (can)

Nissan Altima (L32) 2007-2012 Service Manual: U1010 control unit (can)

DTC Logic

DTC DETECTION LOGIC

Diagnosis Procedure

1. REPLACE BCM

When DTC U1010 is detected, replace BCM.

>> Replace BCM. Refer to BCS-96, "Removal and Installation".

U1000 can comm circuit

Description CAN (Controller Area Network) is a serial communication line for real time applications. It is an on-vehicle multiplex communication line with high data communication speed and excell ...

B2013 ID discord, immu-strg

Description BCM performs the ID verification with the steering lock unit and releases the steering lock if both BCM and steering lock unit ID are same. BCM starts the communication with the steer ...

Other materials:

Front manual seat adjustment (if so equipped)
Your vehicle seats can be adjusted manually. For additional information about adjusting the seats, refer to the steps outlined in this section. WARNING Before driving the vehicle, return the seatback to an upright seating position after manually releasing it. Also, make sure the seat is locked in p ...

Power outlet
Instrument Panel The power outlet is for powering electrical accessories such as cellular telephones. It is rated at 12 volt, 120W (10A) maximum. The power outlet is powered only when the ignition switch is in the AUTO ACC or ON position. CAUTION The outlet and plug may be hot during or immedi ...

LDW system operation
For vehicles with the 7 inch (18 cm) display The LDW system provides a lane departure warning function when the vehicle is driven at speeds of approximately 37 mph (60 km/h) and above and the lane markings are clear. When the vehicle approaches either the left or the right side of the traveling lan ...