Nissan Altima (L32) 2007-2012 Service Manual: U1010 control unit (can)
DTC Logic
DTC DETECTION LOGIC
Diagnosis Procedure
1. REPLACE BCM
When DTC U1010 is detected, replace BCM.
>> Replace BCM. Refer to BCS-96, "Removal and Installation".
DescriptionCAN (Controller Area Network) is a serial communication
line for real time applications. It is an on-vehicle multiplex
communication line with high data communication speed and excellent ...
Description
BCM performs the ID verification with the steering lock unit and releases the
steering lock if both BCM and
steering lock unit ID are same. BCM starts the communication with the steer ...
Other materials: Intelligent Forward Collision Warning (I-FCW)
WARNING
Failure to follow the warnings and instructions
for proper use of the I-FCW
system could result in serious injury or
death.
The I-FCW system can help warn the
driver before a collision occurs but
will not avoid a collision. It is the driver’s
responsibility to stay alert, drive
safel ...
Fuel recommendation
Use unleaded regular gasoline with an octane
rating of at least 87 AKI (Anti-Knock
Index) number (Research octane number
91).
CAUTION
Only vehicles with the E-85 filler door
label can operate on E-85. Fuel system
or other damage can occur if
E-85 is used in vehicles that are not
designed to ru ...
Precautions on SRS
This SRS section contains important information
concerning the following systems:
Driver and front passenger supplemental
front-impact air bag (NISSAN Advanced
Air Bag System)
Front seat-mounted side-impact supplemental
air bag
Rear outboard seat-mounted side-impact
supplemental air bag
Roo ...