Nissan Altima (L33) 2013-2018 Owners Manual: Vehicle Dynamic Control (VDC) off switch
The vehicle should be driven with the Vehicle Dynamic Control (VDC) system on for most driving conditions.
If the vehicle is stuck in mud or snow, the VDC system reduces the engine output to reduce wheel spin. The engine speed will be reduced even if the accelerator is depressed to the floor. If maximum engine power is needed to free a stuck vehicle, turn the VDC system off.
To turn off the VDC system, push the VDC OFF switch. The indicator will come on.
Push the VDC OFF switch again or restart the engine to turn on the system. See “Vehicle Dynamic Control (VDC) system” in the “Starting and driving” section.
Warning systems switch (if so equipped)
The warning systems switch is used to temporarily turn off the warning systems (Lane Departure Warning (LDW) and Blind SpotWarning (BSW) systems) that are activated using the settings menu in th ...Power outlet
Instrument panel The power outlets are for powering electrical accessories such as cellular telephones. They are rated at 12 volt, 120W (10A) maximum. The power outlets are powered only when t ...Other materials:
P0442 Evap control system
DTC Logic
DTC DETECTION LOGIC
This diagnosis detects leakage in the EVAP purge line using engine intake
manifold vacuum.
If pressure does not increase, the ECM will check for leakage in the line
between the fuel tank and EVAP canister
purge volume control solenoid valve, under the followin ...
Steering switch (sedan)
Description
When one of the steering wheel audio control switches is pushed, the
resistance in steering switch circuit
changes depending on which button is pushed.
Diagnosis Procedure
WITH BLUETOOTH
1.CHECK HARNESS
1. Turn ignition switch OFF.
2. Disconnect Bluetooth control unit connect ...
Diagnosis and repair workflow
Repair Work Flow
WORK FLOW
WT-5, "Preliminary Check"
WT-52, "Self-Diagnosis (With CONSULT-III)"
WT-53, "Self-Diagnosis (Without CONSULT-III)"
WT-55, "Symptom Table"
DETAILED FLOW
1.CUSTOMER INFORMATION
Interview the customer to obtain detailed inform ...