Nissan Altima (L32) 2007-2012 Service Manual: Vehicle security indicator
Description
• Vehicle security indicator is built in combination meter.
• NVIS (Nissan Vehicle Immobilizer System-NATS) and vehicle security system conditions are indicated by blink or illumination of vehicle security indicator.
Component Function Check
1.CHECK FUNCTION
1. Perform “THEFT IND” in the “ACTIVE TEST” mode with CONSULT-III.
2. Check vehicle security indicator operation.
Is the inspection result normal? YES >> Inspection End.
NO >> Refer to SEC-514, "Diagnosis Procedure".
Diagnosis Procedure
1.CHECK COMBINATION METER
Check combination meter. Refer to MWI-4, "Work Flow".
Is the inspection result normal? YES >> GO TO 2
NO >> Repair or replace the malfunctioning parts.
2.CHECK INTERMITTENT INCIDENT
Refer to GI-42, "Intermittent Incident".
>> Inspection End.
Warning lamp
Description
• Warning lamp is built in combination meter.
• Remote keyless entry system malfunction is reported to the driver by the
warning lamp illumination.
Component Function Check
1. ...
Ecu diagnosis
...
Other materials:
Ignition coil
Exploded View
1. Ignition coil
2. Spark plug
3. Rocker cover (RH)
4. Rocker cover (LH)
Removal and Installation LH
REMOVAL
1. Remove engine room cover.
2. Disconnect ignition coil connector.
3. Remove the ignition coil.
CAUTION:
Never shock ignition coil.
INSTALLATION
Installatio ...
Variable voltage control system
CAUTION
● Do not ground accessories directly to
the battery terminal. Doing so will bypass
the variable voltage control system
and the vehicle battery may not
charge completely.
● Use electrical accessories with the engine
running to avoid discharging the
vehicle battery.
Your ...
Connecting procedure
NOTE:
The connecting procedure must be performed
when the vehicle is stationary. If the
vehicle starts moving during the procedure,
the procedure will be cancelled.
To connect a phone to the Bluetooth® Hands-
Free Phone System:
1. Press the SETTING button.
2. Use the TUNE/FOLDER knob to s ...
