Nissan Altima (L32) 2007-2012 Service Manual: Vin registration
Description
VIN Registration is an operation to registering VIN in ECM. It must be
performed each time ECM is replaced.
NOTE:
Accurate VIN which is registered in ECM may be required for Inspection &
Maintenance (I/M)
Special Repair Requirement
1.CHECK VIN
Check the VIN of the vehicle and note it. Refer to GI-22, "Identification
Number - Sedan" or GI-23, "Identification
Number - Coupe".
>> GO TO 2.
2.PERFORM VIN REGISTRATION
1. Turn ignition switch ON and engine stopped.
2. Select “VIN REGISTRATION” in “WORK SUPPORT” mode.
3. Follow the instruction of CONSULT-III display.
>> END
Description
This describes how to check the ignition timing. For the actual procedure,
follow the instructions in “BASIC
INSPECTION”.
Special Repair Requirement
1.CHECK IGNITION TIMING
1. A ...
Description
Accelerator Pedal Released Position Learning is a function of ECM to learn
the fully released position of the
accelerator pedal by monitoring the accelerator pedal position sensor outp ...
Other materials: Front power seat adjustment
(if so equipped)
Operating tips
The power seat motor has an auto-reset
overload protection circuit. If the motor
stops during operation, wait 30 seconds
then reactivate the switch.
Do not operate the power seat switch for
a long period of time when the engine is
off. This will discharge the battery.
For add ...
Precautions on seat belt usage
If you are wearing your seat belt properly
adjusted and you are sitting upright and
well back in your seat with both feet on the
floor, your chances of being injured or killed
in a collision and/or the severity of injury
may be greatly reduced. NISSAN strongly
encourages you and all of your passeng ...
Instrument panel
Vents
Steering wheel switches for audio control*
Vehicle information display controls
Headlight/turn signal switch
Paddle shifters (if so equipped)
Driver supplemental air bag
Horn
Meters and gauges
Warning and indicator lights
Vehicle information display
Wiper and washer switch
Heat ...