Nissan Altima 2007-2012 Service Manual: Warning lamp

Description

• Warning lamp is built in combination meter.

• Intelligent Key system malfunction is reported to the driver by the warning lamp illumination.

Component Function Check

1.CHECK FUNCTION

1. Perform “INDICATOR” in the “Active Test” mode with CONSULT-III.

2. Check warning lamp operation.

Is the inspection result normal? YES >> Inspection End.

NO >> Refer to SEC-322, "Diagnosis Procedure".

Diagnosis Procedure

1.CHECK “COMBINATION METER.”

Check combination meter function. Refer to MWI-4, "Work Flow".

Is the inspection result normal? YES >> GO TO 2

NO >> Repair or replace the malfunctioning parts.

2.CHECK INTERMITTENT INCIDENT

Refer to GI-42, "Intermittent Incident".

>> Inspection End.

    Headlamp
    Description Headlamp lighting when theft warning system is in alarm phase. Component Function Check 1.CHECK HEADLAMP OPERATION Check if headlamps operate by lighting switch. Does headlamp come ...

    Vehicle security indicator
    Description • Vehicle security indicator is built in combination meter. • NVIS (Nissan Vehicle Immobilizer System-NATS) and vehicle security system conditions are indicated by blink or ill ...

    Other materials:

    Precaution
    Supplemental Restraint System (SRS) "AIR B AG" and "SEAT BELT PRE-TENSIONER" The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along with a front seat belt, helps to reduce the risk or severity of injury to the driver and fron ...

    On-vehicle maintenance
    ROAD WHEEL Inspection ALUMINUM WHEEL 1. Check tires for wear and improper inflation. 2. Check wheels for deformation, cracks and other damage. If deformed, remove wheel and check wheel runout. a. Remove tire from aluminum wheel and mount on a tire balance machine. b. Set dial indicat ...

    Mixture ratio self-learning value clear
    Description This describes show to erase the mixture ratio self-learning value. For the actual procedure, follow the instructions in “Diagnosis Procedure”. Special Repair Requirement 1.START 1. Start engine and warm it up to normal operating temperature. 2. Select “SELF-LEARNING CO ...