Nissan Altima 2007-2012 Service Manual: Wiring Diagram - Intelligent key system/ engine start function
Wiring Diagram - VEHICLE SECURITY SYSTEM
Wiring Diagram - NVIS
Fail Safe
DTC Inspection Priority Chart
If some DTCs are displayed at the same time, perform inspections one by one based on the following priority chart.
DTC Index
NOTE:
Details of time display
• CRNT: Displays when there is a malfunction now or after returning to the normal condition until turning ignition switch OFF → ON again.
• 1 - 39: Displayed if any previous malfunction is present when current condition is normal. It increases like 1 → 2 → 3...38 → 39 after returning to the normal condition whenever ignition switch OFF → ON. The counter remains at 39 even if the number of cycles exceeds it. It is counted from 1 again when turning ignition switch OFF → ON after returning to the normal condition if the malfunction is detected again.
BCM (Body control module)
Reference Value VALUES ON THE DIAGNOSIS TOOL Terminal Layout Physical Values 1: Sedan only 2: With LH front window anti-pinch 3: With LH and RH ...IPDM E/R (Intelligent power distribution module engine room)
Reference Value VALUES ON THE DIAGNOSIS TOOL TERMINAL LAYOUT PHYSICAL VALUES Wiring Diagram — Coupe Fail Safe CAN COMMUNICATION CONTROL When CAN communication ...Other materials:
Ecu diagnosis
TCM
Reference Value
VALUES ON THE DIAGNOSIS TOOL
TERMINAL LAYOUT
PHYSICAL VALUES
*1: This circuit is not used.
*2: A circuit tester cannot be used to test this item.
Wiring Diagram - CVT CONTROL SYSTEM -
Coupe
Wiring Diagram - CVT CONTROL SYSTEM - Sedan
...
Precaution
Supplemental Restraint System (SRS) AIR BA
G and SEAT BELT PRE-TENSIONER
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”,
used along
with a front seat belt, helps to reduce the risk or severity of injury to the
driver and front passenger for certain
...
Power window lock switch
Description
Ground circuit of main power window and door lock/unlock switch shuts off if
power window lock switch of
main power window and door lock/unlock switch is operated. This inhibits all
operation, except for the main
switch.
Component Function Check
1. CHECK POWER WINDOW LOCK SIGNA ...