Nissan Altima 2007-2012 Service Manual: Common ITEM

 Diagnosis Description

BCM CONSULT-III FUNCTION

CONSULT-III performs the following functions via CAN communication with BCM.

SYSTEM APPLICATION

BCM can perform the following functions for each system.

NOTE: It can perform the diagnosis modes except the following for all sub system selection items.

 CONSULT-III Function

ECU IDENTIFICATION

Displays the BCM part No.

SELF-DIAG RESULT

Refer to PCS-127, "DTC Index".

    Diagnosis system (BCM)
    ...

    Intelligent key
    CONSULT-III Function (BCM - INTELLIGENT KEY) DATA MONITOR ...

    Other materials:

    Oil pump
    Removal and Installation • The oil pump is part of the front cover. For removal and installation of the oil pump, it is necessary to remove and install the front cover. Refer to EM-52, "Removal and Installation". Disassembly and Assembly 1. Front cover 2. Outer rotor 3. Inner ...

    AV branch line circuit
    Diagnosis Procedure INSPECTION PROCEDURE 1.CHECK CONNECTOR 1. Turn the ignition switch OFF. 2. Disconnect the battery cable from the negative terminal. 3. Check the terminals and connectors of the AV control unit for damage, bend and loose connection (unit side and connector side). I ...

    Engine oil
    Inspection OIL LEVEL • Before starting the engine, check the oil level. If the engine is already started, stop it and allow 10 minutes before checking. • Check that the oil level is within the range on the dipstick. • If it is out of range, add oil as necessary. Refer to LU-9, " ...