Nissan Altima 2007-2012 Service Manual: Power Outtlet
On-vehicle repair
HORN
Removal and Installation
REMOVAL
1. Position aside the front fender protector LH. Refer to EXT-19, "Removal
and Installation".
2. Disconnect the horn connectors (A).
3. Remo ...
Precaution
Supplemental Restraint System (SRS) AIR BA
G and SEAT BELT PRE-TENSIONER
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”,
used along
with a front seat be ...
Other materials:
Common ITEM
Diagnosis Description
BCM CONSULT-III FUNCTION
CONSULT-III performs the following functions via CAN communication with BCM.
SYSTEM APPLICATION
BCM can perform the following functions for each system.
NOTE:
It can perform the diagnosis modes except the following for all sub system
s ...
B210D starter relay
Description
Located in IPDM E/R, it runs the starter motor. The starter relay is turned
ON by the BCM when the ignition
switch is in START position. IPDM E/R transmits the starter relay ON signal to
BCM via CAN communication.
DTC Logic
DTC DETECTION LOGIC
NOTE:
• If DTC B210D is display ...
Oil filter
Removal and Installation
REMOVAL
1. Remove the oil filter using Tool.
WARNING:
• Be careful not to get burned, the engine and engine oil
may be hot.
CAUTION:
• When removing, prepare a shop cloth to absorb any oil
leakage or spillage.
• Do not allow engine oil to adhere to the ...
