Nissan Altima 2007-2012 Service Manual: Mirrors
Replacement operations
Description
This section is prepared for technicians who have attained a high level of
skill and experience in repairing collision-
damaged vehicles and also use modern service tools and equipmen ...
Other materials:
B261A push-button ignition switch
Description
IPDM E/R transmits the push-button ignition switch status via CAN
communication to BCM. BCM receives
push-button ignition switch status by hardwire input. BCM compares the 2 signals
for mismatch.
DTC Logic
DTC DETECTION LOGIC
NOTE:
• If DTC B261A is displayed with DTC U1000, ...
ABS branch line circuit
Diagnosis Procedure
INSPECTION PROCEDURE
1.CHECK CONNECTOR
1. Turn the ignition switch OFF.
2. Disconnect the battery cable from the negative terminal.
3. Check the terminals and connectors of the ABS actuator and electric unit
(control unit) for damage, bend
and loose connection (unit ...
Self-diagnosis cannot be performed
Diagnosis Procedure
SYMPTOM: Self-diagnosis cannot be performed.
1.CHECK SELF-DIAGNOSIS FUNCTION
1. Press ignition switch ON.
2. Set in self-diagnosis mode as follows. Within 10 seconds after starting
engine (ignition switch is Pressed
ON.), press OFF switch for at least 5 seconds.
NOTE ...