Nissan Altima 2007-2012 Service Manual: Driver side power window alone does not operate

Diagnosis Procedure

1. CHECK POWER WINDOW MOTOR LH

Check power window motor LH.

Refer to PWC-25, "DRIVER SIDE : Component Function Check".

Is the inspection result normal? YES >> Inspection End.

NO >> Check intermittent incident. Refer to GI-42, "Intermittent Incident".

    None of the power windows can be operated using any switch
    Diagnosis Procedure 1. CHECK BCM POWER SUPPLY AND GROUND CIRCUIT Check BCM power supply and ground circuit. Refer to BCS-42, "Diagnosis Procedure". Is the inspection result normal? ...

    Passenger side power window alone does not operate
    Diagnosis Procedure 1. CHECK POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH RH Check power window and door lock/unlock switch RH. Refer to PWC-22, "PASSENGER SIDE : Component Function Check" ...

    Other materials:

    B26e1 no reception of engine status signal
    Description BCM receives the engine status signal from ECM via CAN communication. DTC Logic DTC DETECTION LOGIC NOTE: • If DTC B26E1 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to SEC-433, "DTC Logic". • If DTC B26E1 is displayed w ...

    Tachometer
     System Diagram System Description The tachometer indicates engine speed in revolutions per minute (rpm). The ECM provides an engine speed signal to the combination meter via CAN communication lines. Component Parts Location 1. Combination meter M24 2. IPDM E/R E17, E18, E201, ...

    Front fog lamp
    Aiming Adjustment The fog lamp is a semi-sealed beam type which uses a replaceable halogen bulb. Before performing aiming adjustment, make sure of the following. • Keep all tires inflated to correct pressure. • Place vehicle on level ground. • See that vehicle is unloaded (except ...