Nissan Altima (L34) 2019-2025 Owners Manual ≻ Do-it-yourself ≻ Engine compartment check locations

Nissan Altima (L34) 2019-2025 Owners Manual: Engine compartment check locations

Nissan Altima L34. Engine compartment check locations

2.0L 4 cylinder (KR20DDET engine model)

Engine coolant reservoir
Drive belt location
Engine oil filler cap
Brake fluid reservoir
Battery
Fuse/Fusible link box
Air cleaner
Radiator cap
Engine oil dipstick
Windshield-washer fluid reservoir

NOTE:

Your vehicle may not be equipped with an engine cover.

Nissan Altima L34. Engine compartment check locations

2.5L 4 cylinder (PR25DD engine model)

Engine coolant reservoir
Drive belt location
Engine oil filler cap
Engine oil dipstick
Brake fluid reservoir
Battery
Fuse/Fusible link box
Air cleaner
Radiator cap
Windshield-washer fluid reservoir

NOTE:

Your vehicle may not be equipped with an engine cover.

Maintenance precautions

When performing any inspection or maintenance work on your vehicle, always take care to prevent serious accidental injury to yourself or damage to the vehicle. The following are general precautions wh ...

Engine cooling system

The engine cooling system is filled at the factory with a pre-diluted mixture of 50% Genuine NISSAN Long Life Antifreeze/ Coolant (blue) and 50% water to provide year-round antifreeze and coolant prot ...

Other materials:

Windshield wiper blades
Cleaning If your windshield is not clear after using the windshield-washer or if a wiper blade chatters when running, wax or other material may be on the blade or windshield. Clean the outside of the windshield with a washer fluid or a mild detergent. Your windshield is clean if beads do not form w ...

Intelligent Driver Alertness system operation
For vehicles with the 7 inch (18 cm) display For vehicles with the 5 inch (13 cm) display If the system detects driver fatigue or that driver attention is decreasing, the message "Take a break?" appears in the vehicle information display and a chime sounds when the vehicle is driven at speeds abov ...

Starting the engine
1. Apply the parking brake. 2. Move the shift lever to P (Park) or N (Neutral). P (Park) is recommended. The starter is designed not to operate if the shift lever is in any of the driving positions. 3. Push the ignition switch to the ON position. Depress the brake pedal and push the ignition swi ...