Nissan Altima (L32) 2007-2012 Service Manual: Features of new model
IDENTIFICATION INFORMATION
Model Variation - Sedan
Model Variation - Coupe
Identification Number - Sedan
1. Vehicle identification number (under
carpet on cross member)
2. Emission control information label
3. Air Conditioner specification label
4. Vehicle identification number plate
5. Tire placard
6. Certification label
Vehicle Identification Number Arrangement
Identification Number - Coupe
1. Vehicle identification number (under
carpet on cross member)
2. Emission control information label
3. Air Conditioner specification label
4. Vehicle identification number plate
5. Tire placard
6. Certification label
Vehicle Identification Number Arrangement
Identification Plate
Engine Serial Number
CVT Number
Manual Transaxle Number
Dimensions - Sedan
Dimensions - Coupe
Wheels & Tires
SAE J1930 Terminology List
All emission related terms used in this publication in accordance with SAE
J1930 are listed. Accordingly, new
terms, new acronyms/abbreviations and old terms are listed ...
Other materials: System maintenance
The two radar sensors 1 for the BSW and
RCTA systems are located near the rear
bumper. Always keep the area near the radar
sensors clean.
The radar sensors may be blocked by temporary
ambient conditions such as splashing
water, mist or fog.
The blocked condition may also be caused
by objects such ...
Changing engine oil and oil filter
For additional information on engine oil
and oil filter change, refer to the instructions
outlined in this section.
Vehicle set-up
1. Park the vehicle on a level surface and
apply the parking brake.
2. Run the engine until it reaches operating
temperature.
3. Turn the engine off and wait for 15 mi ...
Hood
Pull the hood lock release handle 1 located
below the driver's side instrument
panel; the hood springs up slightly.
To open the hood, push the lever 2 underneath
the front of the hood upwards
with your fingertips as illustrated and
raise the hood.
Remove the support rod from the clamp 3.
...