Nissan Altima 2007-2012 Service Manual: Function diagnosis
Inspection and adjustment
Preliminary Check 1.TIRE PRESSURE Check all tire pressures. Refer to WT-70, "Tire". Do tire pressures match specification? YES >> GO TO 2 NO >> Adjust tire pressure to spe ...TPMS
System Diagram System Description BODY CONTROL MODULE (BCM) The BCM is shown with the instrument panel LH removed. The BCM reads the air pressure signal received by the tire pressure receiver, ...Other materials:
B2109 steering lock relay
Description
The steering lock relay ON signal is transmitted to IPDM E/R by BCM via CAN
communication.
IPDM E/R turns the steering lock relay ON and transmits the release of the
steering to BCM.
DTC Logic
DTC DETECTION LOGIC
NOTE:
• If DTC B2109 is displayed with DTC U1000, first perf ...
Main line between DLC And ABS Circuit
Diagnosis Procedure
INSPECTION PROCEDURE
1.CHECK CONNECTOR
1. Turn the ignition switch OFF.
2. Disconnect the battery cable from the negative terminal.
3. Check the following terminals and connectors for damage, bend and loose
connection (connector side
and harness side).
- Harness co ...
P0122, P0123 TP sensor
Description
Electric throttle control actuator consists of throttle control motor,
throttle position sensor, etc. The throttle position sensor responds to
the throttle valve movement.
The throttle position sensor has two sensors. These sensors are a
kind of potentiometers which transform th ...