Nissan Altima 2007-2012 Service Manual: Function diagnosis
Additional service when replacing control unit
Description
Initial setting is necessary when replacing power window main switch.
CAUTION:
The following specified operations are not performed under the non-initialized
condition.
• Auto-up ...
Power window system
System Diagram
FRONT WINDOW ANTI-PINCH SYSTEM
System Description
POWER WINDOW MAIN SWITCH
INPUT/OUTPUT SIGNAL CHART
POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH
INPUT/OUTPUT SIGNAL CHART
PO ...
Other materials:
B210a steering lock condition switch
Description
There are 2 switches in the steering unit. IPDM E/R compares those 2 switches
conditions to judge the
present steering status and transmit the result to BCM via CAN communication.
DTC Logic
DTC DETECTION LOGIC
NOTE:
• If DTC B210A is displayed with DTC U1000, first perform the ...
P0327, P0328 KS
Description
The knock sensor is attached to the cylinder block. It senses engine knocking
using a piezoelectric element. A
knocking vibration from the cylinder block is sensed as vibrational pressure.
This pressure is converted into a
voltage signal and sent to the ECM.
DTC Logic
DTC DETEC ...
P0452 evap control system pressure
sensor
Description
The EVAP control system pressure sensor detects pressure in the
purge line. The sensor output voltage to the ECM increases as pressure
increases.
DTC Logic
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.PRECONDITIONING
If DTC Confirmation Procedure has been previously condu ...