Nissan Altima 2007-2012 Service Manual: Lan system circuit

Description

SYMPTOM: Mode door motor, intake door motor and/or air mix door motor does not operate normally.

Diagnosis Procedure

DIAGNOSIS PROCEDURE FOR LAN CIRCUIT

1.CHECK POWER SUPPLY FOR DOOR MOTORS

1. Press ignition switch ON.

2. Check voltage between front air control connector M37 terminal 20 and ground.

Is the inspection result normal? YES >> GO TO

NO >> Replace front air control. Refer to VTL-8, "Removal and Installation".

2.CHECK SIGNAL FOR DOOR MOTORS

Check voltage between front air control connector M37 terminal 3 and ground.

Is the inspection result normal? YES >> GO TO 3

NO >> Replace front air control. Refer to VTL-8, "Removal and Installation".

3.CHECK POWER SUPPLY FOR MOTOR

Check voltage between mode door motor connector M127 terminal 3 and ground, between air mix door motor connector M130 terminal 3 and ground, and between intake door motor connector M126 terminal 3 and ground.

Is the inspection result normal? YES >> GO TO 4

NO >> Replace harness or connector.

4.CHECK SIGNAL FOR MOTOR

Check voltage between mode door motor connector M127 terminal 1 and ground, between air mix door motor connector M130 terminal 1 and ground, and between intake door motor connector M126 terminal 1 and ground.

Is the inspection result normal? YES >> GO TO 5

NO >> Replace harness or connector.

5.CHECK MOTOR GROUND CIRCUIT

1. Press ignition switch OFF.

2. Disconnect door motor connectors.

3. Check continuity between mode door motor connector M127 terminal 2 and ground, between air mix door motor connector M130 terminal 2 and ground, and between intake door motor connector M126 terminal 2 and ground.

Is the inspection result normal? YES >> GO TO 6

NO >> Replace harness or connector.

6.CHECK MOTOR OPERATION

Disconnect and reconnect the motor connectors and confirm the motor operation.

Is the inspection result normal? YES >> (Returns to normal operation.) • Motor connector contacts dirty or damaged

NO >> (Does not operate normally.) • GO TO 7

7.CHECK MODE DOOR MOTOR AND AIR MIX DOOR MOTOR OPERATION

1. Disconnect the intake door motor connector.

2. Reconnect the mode door motor connector and air mix door motor connector, confirm the mode door motor and air mix door motor operation.

Is the inspection result normal? YES >> (Mode door motor and air mix door motor operate normally.) • Replace the intake door motor. Refer to VTL-17, "Removal and Installation".

NO >> (Mode door motor and air mix door motor do not operate normally.) • GO TO 8

8.CHECK AIR MIX DOOR MOTOR AND INTAKE DOOR MOTOR OPERATION

1. Disconnect mode door motor connector.

2. Reconnect the intake door motor connector, confirm the air mix door motor and intake door motor operation.

Is the inspection result normal? YES >> (Air mix door motor and intake door motor operate normally.) • Replace mode door motor. Refer to VTL-18, "Removal and Installation".

NO >> (Air mix door motor and intake door motor do not operate normally.) • GO TO 9

9.CHECK INTAKE DOOR MOTOR AND MODE DOOR MOTOR OPERATION

1. Disconnect air mix door motor connector.

2. Reconnect mode door motor connector, confirm the intake door motor and mode door motor operation.

Is the inspection result normal? YES >> (Intake door motor and mode door motor operate normally.) • Replace inoperative air mix door motor. Refer to VTL-19, "Removal and Installation".

NO >> (Intake door motor and mode door motor do not operate normally.) • Replace front air control. Refer to VTL-8, "Removal and Installation".

    Mode door motor
    Description SYSTEM DESCRIPTION Component Parts Mode door control system components are: • Front air control • Mode door motor (LCU) System Operation The front air control receives user inpu ...

    Other materials:

    P0181 FTT sensor
    Description The fuel tank temperature sensor is used to detect the fuel temperature inside the fuel tank. The sensor modifies a voltage signal from the ECM. The modified signal returns to the ECM as the fuel temperature input. The sensor uses a thermistor which is sensitive to the change in te ...

    Rear window defogger relay
    Description Power is supplied to the rear window defogger with BCM control. Component Function Check 1. CHECK REAR WINDOW DEFOGGER RELAY POWER SUPPLY CIRCUIT Check that an operation noise of rear window defogger relay [located in fuse block (J/B)] can be heard when turning the rear window de ...

    Mechanical system
    Cross-Sectional View 1. Converter housing 2. Driven sprocket 3. Chain 4. Reverse brake 5. Oil pump 6. Forward clutch 7. Planetary carrier 8. Primary pulley 9. Sun gear 10. Steel belt 11. Side cover 12. Internal gear 13. Parking gear 14. Secondary pulley 15. Final gear 16. Differen ...