Nissan Altima (L32) 2007-2012 Service Manual: On-vehicle repair
- Body component parts
- Corrosion protection
- Body sealing
- Body construction
- Body alignment
- Precautions in repairing high strength steel
- Replacement operations
Precaution
HANDLING PRECAUTIONS FOR PLASTICS Precautions For Plastics 1. When repairing and painting a portion of the body adjacent to plastic parts, consider their characteristics (influence of heat and ...Body component parts
Underbody Component Parts 1. Upper dash assembly 2. Lower dash crossmember reinforcement 3. Rear crossmember (RH, LH) 4. Front crossmember (RHLH) 5. Front sidemember reinforcement upper (RHLH) ...Other materials:
ECM branch line circuit
Diagnosis Procedure
INSPECTION PROCEDURE
1.CHECK CONNECTOR
1. Turn the ignition switch OFF.
2. Disconnect the battery cable from the negative terminal.
3. Check the following terminals and connectors for damage, bend and loose
connection (unit side and connector
side).
- ECM
- Harnes ...
Ignition signal
Description
The ignition signal from the ECM is sent to and amplified by the power
transistor. The power transistor turns
ON and OFF the ignition coil primary circuit. This ON/OFF operation induces the
proper high voltage in the coil
secondary circuit.
Component Function Check
1.INSPECTION ...
Auto light system
System Diagram
System Description
• BCM (Body Control Module) controls auto light operation according to
signals from optical sensor, lighting
switch and ignition switch.
• IPDM E/R (Intelligent Power Distribution Module Engine Room) operates parking,
license plate, tail, front fog ...