Nissan Altima (L32) 2007-2012 Service Manual: Power supply and ground circuit
Power window main switch
Description
• BCM supplies power.
• It operates each power window motor via corresponding power window switch and
makes window move up/
down when main power window and door lock/unlock swi ...
Other materials:
Seat belt, buckles, retractors, anchors
and adjusters
Inspection
CAUTION:
• After any collision, inspect all seat belt assemblies, including retractors
and other attached hardwares
(I.e. anchor bolt, guide rail set). Nissan recommends to replace all seat belt
assemblies in use
during a collision, unless not damaged and properly operating afte ...
P0730 belt damage
Description
TCM selects the gear ratio using the engine load (throttle position), the
primary pulley revolution speed, and
the secondary pulley revolution speed as input signal. Then it changes the
operating pressure of the primary
pulley and the secondary pulley and changes the groove width ...
Front power seat adjustment
(if so equipped)
Operating tips
The power seat motor has an auto-reset
overload protection circuit. If the motor
stops during operation, wait 30 seconds
then reactivate the switch.
Do not operate the power seat switch for
a long period of time when the engine is
off. This will discharge the battery.
For add ...
