Nissan Altima 2007-2012 Service Manual: Preparation

Special Service Tools

The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.

Commercial Service Tools

    Precaution
    Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER ...

    On-vehicle maintenance
    M/T OIL Draining 1. Start engine and let it run to warm up transaxle oil. 2. Stop engine and remove the drain plug to drain the oil. 3. Install the drain plug with a new gasket to the transax ...

    Other materials:

    B210a steering lock condition switch
    Description There are 2 switches in the steering unit. IPDM E/R compares those 2 switches conditions to judge the present steering status and transmit the result to BCM via CAN communication. DTC Logic DTC DETECTION LOGIC NOTE: • If DTC B210A is displayed with DTC U1000, first perform the ...

    P0340 CMP sensor (phase)
    Description The camshaft position sensor (PHASE) senses the retraction of camshaft (INT) to identify a particular cylinder. The camshaft position sensor (PHASE) senses the piston position. When the crankshaft position sensor (POS) system becomes inoperative, the camshaft position sensor (PHAS ...

    Sunroof system
    System Diagram SUNROOF System Description SUNROOF SYSTEM INPUT/OUTPUT SIGNAL CHART SUNROOF OPERATION • Sunroof motor assembly operates with the power supply that is output from BCM while ignition switch is ON or retained power is operating. • Tilt up/ down & slide open/ clos ...