Nissan Altima 2007-2012 Service Manual: Recommended chemical products and sealants
Recommended Chemical Products and Sealants
Refer to the following chart for help in selecting the appropriate chemical product or sealant.
Tightening torque of standard
bolts
Tightening Torque Table
*: Nominal diameter
1. Special parts are excluded.
2. This standard is applicable to bolts having the following marks embossed on
the bolt head.
...
Terminology
SAE J1930 Terminology List
All emission related terms used in this publication in accordance with SAE
J1930 are listed. Accordingly, new
terms, new acronyms/abbreviations and old terms are listed ...
Other materials:
B210F PNP/clutch interlock switch
Description
IPDM E/R confirms the shift position with the following signals.
• Park/neutral position (PNP) switch (CVT models)
• Clutch interlock switch (M/T models)
• Shift position signal from BCM (CAN)
DTC Logic
DTC DETECTION LOGIC
NOTE:
• If DTC B210F is displayed with DTC U100 ...
P2014 tumble control valve position
sensor
Description
Tumble control valve position sensor is built into the tumble control
valve actuator (2).
1 : Intake manifold adapter
3 : Tumble control valve
The sensor consists of a permanent magnet and Hall IC. It senses
the valve shaft movement and feeds the voltage signals to the ECM.
DTC ...
P0300, P0301, P0302, P0303, P0304 misfire
DTC Logic
DTC DETECTION LOGIC
When a misfire occurs, engine speed will fluctuate. If the engine speed
fluctuates enough to cause the crankshaft
position (CKP) sensor (POS) signal to vary, ECM can determine that a misfire is
occurring.
The misfire detection logic consists of the following ...