Nissan Altima 2007-2012 Service Manual: Common ITEM

 Diagnosis Description

BCM CONSULT-III FUNCTION

CONSULT-III performs the following functions via CAN communication with BCM.

SYSTEM APPLICATION

BCM can perform the following functions for each system.

NOTE: It can perform the diagnosis modes except the following for all sub system selection items.

CONSULT-III Function

ECU IDENTIFICATION

Displays the BCM part No.

SELF-DIAG RESULT

Refer to BCS-91, "DTC Index".

    Retained PWR
     CONSULT-III Function (BCM - RETAINED PWR) Data monitor ...

    Other materials:

    Door switch
    Description Detects door open/close condition. Component Function Check 1.CHECK FUNCTION Check door switches DOOR SW-DR, DOOR SW-AS in Data Monitor mode with CONSULT-III. Is the inspection result normal? YES >> Door switch is OK. NO >> Refer to RF-17, "Diagnosis Proc ...

    Ignition signal
    Description The ignition signal from the ECM is sent to and amplified by the power transistor. The power transistor turns ON and OFF the ignition coil primary circuit. This ON/OFF operation induces the proper high voltage in the coil secondary circuit. Component Function Check 1.INSPECTION ...

    Indicator lights
    For additional information on warnings and indicators, see “Vehicle information display” later in this section. Front fog light indicator light (if so equipped) The front fog light indicator light illuminates when the front fog lights are ON. See “Fog light switch” later in this sec ...