Nissan Altima 2007-2012 Service Manual: Component diagnosis
Wiring Diagram - Coupe
Wiring Diagram - Sedan
Precaution
Supplemental Restraint System (SRS) AIR BA
G and SEAT BELT PRE-TENSIONER
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”,
used along
with a front seat be ...
On-vehicle repair
HORN
Removal and Installation
REMOVAL
1. Position aside the front fender protector LH. Refer to EXT-19, "Removal
and Installation".
2. Disconnect the horn connectors (A).
3. Remo ...
Other materials:
On-vehicle repair
EVAP CANISTER
Exploded View
Removal and Installation
REMOVAL
1. Lift up the vehicle.
2. Remove EVAP canister fixing bolt.
3. Remove EVAP canister.
NOTE:
The EVAP canister vent control valve and EVAP canister system pressure sensor
can be removed without
removing the EVAP canister ...
P0181 FTT sensor
Description
The fuel tank temperature sensor is used to detect the fuel temperature
inside the fuel tank. The sensor modifies a voltage signal from
the ECM. The modified signal returns to the ECM as the fuel temperature
input. The sensor uses a thermistor which is sensitive to the
change in te ...
IPDM-E branch line circuit
Diagnosis Procedure
INSPECTION PROCEDURE
1.CHECK CONNECTOR
1. Turn the ignition switch OFF.
2. Disconnect the battery cable from the negative terminal.
3. Check the terminals and connectors of the IPDM E/R for damage, bend and loose
connection (unit side
and connector side).
Is the in ...