Nissan Altima 2007-2012 Service Manual: Ecu diagnosis
- BCM (Body control module)
- Wiring Diagram - Intelligent key system/ engine start function
- IPDM E/R (Intelligent power distribution module engine room)
Vehicle security indicator
Description
• Vehicle security indicator is built in combination meter.
• NVIS (Nissan Vehicle Immobilizer System-NATS) and vehicle security system
conditions are indicated by
blink or illu ...
BCM (Body control module)
Reference Value
VALUES ON THE DIAGNOSIS TOOL
Terminal Layout
Physical Values
1: Sedan only
2: With LH front window anti-pinch
3: With LH and RH ...
Other materials:
On board diagnostic (OBD) system
Diagnosis Description
INTRODUCTION
The ECM has an on board diagnostic system, which detects malfunctions related
to engine sensors or actuators.
The ECM also records various emission-related diagnostic information including:
The above information can be checked using procedures listed in ...
P0335 CKP sensor (POS)
Description
The crankshaft position sensor (POS) is located on the oil pan facing
the gear teeth (cogs) of the signal plate. It detects the fluctuation of
the engine revolution.
The sensor consists of a permanent magnet and Hall IC.
When the engine is running, the high and low parts of the ...
B210E starter relay
Description
Located in IPDM E/R, it runs the starter motor. The starter relay is turned
ON by the BCM when the ignition
switch is in START position. IPDM E/R transmits the starter relay ON signal to
BCM via CAN communication.
DTC Logic
DTC DETECTION LOGIC
NOTE:
• If DTC B210E is displa ...
