Nissan Altima 2007-2012 Service Manual: Function diagnosis
Basic inspection
DIAGNOSIS AND REPAIR WORKFLOW
Work Flow
OVERALL SEQUENCE
DETAILED FLOW
1. GET INFORMATION FOR SYMPTOM
Get the detailed information from the customer about the symptom (the
condition and the ...
Front wiper and washer system
System Diagram
System Description
OUTLINE
The front wiper is controlled by each function of BCM and IPDM E/R.
Control by BCM
• Combination switch reading function
• Front wiper control fu ...
Other materials:
Function diagnosis
M/T SYSTEM
System Diagram
CROSS-SECTIONAL VIEW
1. Transaxle case
2. 3rd input gear
3. 3rd-4th synchronizer hub
4. 3rd-4th coupling sleeve
5. 4th input gear
6. 5th input gear
7. 5th-6th synchronizer hub
8. 5th-6th coupling sleeve
9. 6th input gear
10. Input shaft rear bearing
11. Mains ...
B2603 shift position status
Description
BCM confirms the shift position with the following 2 signals.
• CVT selector lever
• P/N position switch
DTC Logic
DTC DETECTION LOGIC
NOTE:
• If DTC B2603 is displayed with DTC U1000, first perform the trouble diagnosis
for DTC U1000. Refer to
SEC-36, "DTC Logic& ...
Capacities and recommended fuel/lubricants
The following are approximate capacities. The actual refill capacities may
be slightly different. When refilling, follow the procedure
described in the “Maintenance and do-it-yourself” section to determine the
proper refill capacity.
*1: For further details, see “Engine oil and oil fil ...