Nissan Altima 2007-2012 Service Manual: Theft ALM
CONSULT-III Function (BCM - THEFT ALM)
WORK SUPPORT
DATA MONITOR
ACTIVE TEST
Trunk
CONSULT-III Function (BCM - TRUNK) DATA MONITOR ACTIVE TEST ...Retained PWR
CONSULT-III Function (BCM - RETAINED PWR) Data monitor ...Other materials:
P0143 HO2S3
Description
The heated oxygen sensor 3, after HC adsorption catalyst (Under
floor), monitors the oxygen level in the exhaust gas on each bank.
This sensor is made of ceramic zirconia. The zirconia generates voltage
from approximately 1V in richer conditions to 0V in leaner conditions.
Unde ...
Ambient sensor signal circuit
Description
Transmits the ambient sensor signal to the combination meter.
Component Function Check
1.COMBINATION METER INPUT SIGNAL
1. Select “METER/M&A” on CONSULT-III.
2. Using “OUTSIDE TEMP” on “DATA MONITOR”, compare the value of DATA MONITOR
with temperature
display ...
BSW driving situations
Another vehicle approaching from
behind
The Blind spot indicator light illuminates if a vehicle
enters the detection zone from behind in an
adjacent lane.
However, if the overtaking vehicle is traveling
much faster than your vehicle, the indicator light
may not illuminate before the detec ...