Nissan Altima (L32) 2007-2012 Service Manual: U1000 Can comm circuit
Description
Refer to AV-240, "System Description".
DTC Logic
DTC DETECTION LOGIC
Diagnosis Procedure
Symptom: Displays “CAN COMM CIRCUIT [U1000]” as a self-diagnosis result of AV
control unit.
1.CHECK CAN COMMUNICATION
Select “SELF-DIAG RESULTS” mode for “MULTI AV” with CONSULT-III.
>> Go to “LAN system”. Refer to LAN-16, "Trouble Diagnosis Flow Chart".
Description
Refer to LAN-9, "Description".
DTC Logic
DTC DETECTION LOGIC
Diagnosis Procedure
Symptom: Displays “CONTROL UNIT (CAN) [U1010]” as a self-diagnosis result of
AV c ...
Other materials: Vehicle identification
Vehicle Identification Number (VIN)
plate
The Vehicle Identification Number (VIN)
plate is attached as shown. This number is
the identification for your vehicle and is
used in the vehicle registration.
Vehicle identification number
(chassis number)
The vehicle identification number is located
as s ...
Intelligent Driver Alertness (I-DA)
WARNING
Failure to follow the warnings and instructions
for proper use of the I-DA
system could result in serious injury or
death.
The I-DA system is only a warning to
inform the driver of a potential lack
of driver attention or drowsiness. It
will not steer the vehicle or prevent
loss of cont ...
Changing engine oil and oil filter
For additional information on engine oil
and oil filter change, refer to the instructions
outlined in this section.
Vehicle set-up
1. Park the vehicle on a level surface and
apply the parking brake.
2. Run the engine until it reaches operating
temperature.
3. Turn the engine off and wait for 15 mi ...