Nissan Altima (L32) 2007-2012 Service Manual ≻ Security control system sedan without intelligent key ≻ Component diagnosis ≻ Headlamp

Nissan Altima (L32) 2007-2012 Service Manual: Headlamp

Description

Headlamp lighting when theft warning system is in alarm phase.

Component Function Check

1.CHECK HEADLAMP OPERATION

Check if headlamps operate by lighting switch.

Does headlamp come on when turning switch “ON”? YES >> Headlamp circuit is OK.

NO >> Check headlamp system. Refer to SEC-512, "Diagnosis Procedure".

Diagnosis Procedure

1.CHECK HEADLAMP OPERATION

Refer to EXL-61, "Wiring Diagram - Sedan".

Is the inspection result normal? YES >> GO TO 2

NO >> Repair or replace malfunctioning parts.

2.CHECK INTERMITTENT INCIDENT

Refer to GI-42, "Intermittent Incident".

>> Inspection End.

Horn

Description Horn (high/low) is located inside of front bumper and operates when theft warning system is in alarm phase. Component Function Check 1.CHECK FUNCTION 1. Select HORN in “ACTIVE TES ...

Warning lamp

Description • Warning lamp is built in combination meter. • Remote keyless entry system malfunction is reported to the driver by the warning lamp illumination. Component Function Check 1. ...

Other materials:

Intelligent Around View Monitor system operation
With the ignition switch in the ON position, move the shift lever to the R (Reverse) position or press the CAMERA button to operate the Intelligent Around View Monitor. The screen displayed on the Intelligent Around View Monitor will automatically return to the previous screen 3 minutes after the C ...

RCTA system operation
For vehicles with the 7 inch (18 cm) display Side BSW/RCTA Indicator Light The RCTA system can help alert the driver of an approaching vehicle when the driver is backing out of a parking space. For vehicles with the 5 inch (13 cm) display When the shift position is in R (Reverse) and the vehicl ...

Programming HomeLink
If you have any questions or are having difficulty programming your HomeLink buttons, refer to the HomeLink website at: www.homelink.com or call 1-800-355-3515. NOTE: Place the ignition switch in the ON position (without starting the engine) when programming HomeLink. It is also recommended that ane ...